Scantronic 4603 Instrukcja Instalacji Pobierz pdf (Strona 3)

496372 Issue 1 3 of 34

BATTERY CARE

DO NOT DESTROY THE BATTERY IN A FIRE.

DO NOT ATTEMPT TO OPEN THE BATTERY.

DO NOT ATTEMPT TO RECHARGE THE BATTERY.

DO NOT HIT THE BATTERY WITH A HEAVY OBJECT.

PAY ATTENTION TO THE METHOD OF DISPOSAL.

If in any doubt contact Scantronic for further disposal information.

4601

Introduction

The 4601-50/60 are narrow band, FM pendant radio transmitters compatible

with any Scantronic 4600 radio receivers, and are designed to be used as an

alarm trigger in dispersed alarm units, nursecall systems and as a panic

button in security and call systems. The 4601-60 can be used as a remote

setting device with the 4600 radio intruder alarm panel.

The units are supplied in an ABS, fire-retardant, plastic housing with a

flexible, tactile, trigger button moulded in neoprene rubber. The non-aller-

genic, silicon rubber aerial cord of the 4601-50 version enables the user to

wear the unit round his or her neck. The unit has a degree of splash resist-

ance but it is not designed to be immersed in water.

An optional clip (part no. 04630EUR) is available. This clip enables the

transmitter to be clipped to clothing and so avoid the possibility of falling into

liquids or food. The clip uses a longer screw than the normal case screw but

uses the same fixing holes.

To trigger the 4601-50/60 press the orange button on the front of the unit. A

top-facing red LED stays lit for about 4 seconds to confirm transmission.

Technical Specification

Dimensions h x w x d 58 x 40 x 16mm.

Input supply 3.7V Lithium battery.

Operating temperature -10° to +55° C.

Frequency 173.225 MHz.

Output power 1mW.

Fully DTI approved to MPT1344. No licence required. For use in

BS6799:1986 systems classes 1-3.

Coding the Transmitter

Open the case, by removing the two cross headed screws at the rear. Turn the

unit over so that the screw holes are underneath. Gently remove the cover,

taking care not to damage the sealant, and place the cover on one side.

4601

1 2 3 4 5 6 7 8 ... 33 34

Brak uwag

Scantronic 4603 Instrukcja Instalacji Strona 3