Scantronic 4603 Instrukcja Instalacji Strona 20
- Strona / 34
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
20 of 34 496372 Issue 1
Final Commissioning
After coding switch on the battery. Find switch 2 of the small black 2-way DIL
switch (marked ON/OFF). Set to ON using a terminal screwdriver or ball
point pen. If your unit shows low battery operate the orange buttons five or six
times at five second intervals. The sixth and subsequent transmissions
should give a normal transmission.
Note: DIL switch changes will not take effect until the transmitter is operated twice.
Refit the lid and screws, and tighten them.
Testing
Determine the limits of the transmitter’s range and inform the user of these
limits. Check that the unit will function in all areas where the user EXPECTS
it to function and point out any discrepancies.
You can switch the 4605-55 on so that it transmits a continuous test signal.
This facility helps in range-testing and fault-finding. To activate the test signal
turn the switch marked TEST (on the 2-way DIL switch) to ON.
Figure 15. ON/OFF and Test Switches
To ensure good reception use the Scantronic 4690 field strength meter to
obtain accurate field strength readings and audible and visual indication of
the transmitter’s performance and any interference present.
Turn the TEST switch OFF when you have completed testing, or the trans-
mitter will block ALL radio signals to your receiver!
4606
Introduction
The 4606-55 has an integral tilt switch and can be used as a personal attack
transmitter.
Personal Attack - Press the two orange side buttons together. The transmit-
ter does not signal if you press only one button. Note the black button fitted
below the left-hand orange button. This is a safety lock to prevent false
activations. Slide the black button upwards to lock the orange button.
4606
- 4601/4602/4603/4604/4605/ 1
- 4606/4608/4609/4624 1
- Reference Guide 1
- Battery Life 2
- 4600 Panel 4
- 496372 Issue 1 5 of 34 5
- Re-assembly 6
- 8 of 34 496372 Issue 1 8
- Physical Layout 10
- Controls 11
- Technical Specification 12
- Programming 12
- Both Channels (Door Contact) 13
- Other Checks 14
- Introduction 14
- Final Commissioning 14
- Coding The Transmitter 15
- 4611/4613 16
- Switching On 16
- 496372 Issue 1 21 of 34 21
- PIR PCB Layout 23
- Figure 16. 4608 PB Layout 24
- Lens Changing and Patterns 25
- CODING THE TRANSMITTER 26
- 496372 Issue 1 27 of 34 27
- Zone Locator Test 28
- Walk Test 28
- Normal Operation 28
- Coding the Transmitter 29
- Technical Specifications 31
- Setting Up Modes 32
- 4618/9 only 32
- 4612 only 32
- Low Battery (Power) Reporting 33
- 34 of 34 496372 Issue 1 34
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Scantronic 4603
(30 strony)Panasonic DVDLS55EG manuales
Manuales del propietario y guías del usuario para Audio Panasonic DVDLS55EG.
Ofrecemos 1 manuales en pdf Panasonic DVDLS55EG para descargar gratis por tipos de documentos: Manual de usuario
Komentarze do niniejszej Instrukcji