Scantronic 4603 Instrukcja Instalacji Pobierz pdf (Strona 27)

496372 Issue 1 27 of 34

4600

Set switches 1 to 6 to the site-code of the 4600. Set switches 7-10 to the

zone number as shown for the 4604.

4611/4613

Not compatible.

4612

Set switches 1-10 to the site code of the 4612. The tamper channel triggers

channel B. The alarm channel triggers channel A.The 4612 must be in 2-

channel mode. For further information refer to the 4612 Installation Guide.

4618/9

Set switches 1 to 8 to the site code of the 4618/9. Set switches 9 to 10 to the

device number as shown for the 4605.

4660/75

Refer to the appropriate installation manual.

4608 Transmitter Board

With the Passive Infra-Red Detector sited and set up you can now power

down the unit and install the transmitter board via the 5 molex pins. Take

care to align the pins correctly. Locate the PCB on the small peg on the PIR

Pyro Detector housing and the top plastic clip.

With the transmitter in place set up the site (identification) code and unit

(channel) code on the 10 way DIL switch located to the left of the transmitter

PCB.

Figure 19. 4608 Transmitter PCB

4608

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Brak uwag

Scantronic 4603 Instrukcja Instalacji Strona 27