Scantronic 4603 Instrukcja Instalacji Pobierz pdf (Strona 10)

10 of 34 496372 Issue 1

The 4603-60 operates on the DTI-specified frequency for alarm systems, and

can be used as a one or two channel alarm transmitter, Personal Attack

button, door contact, or a Boat/Caravan single zone alarm panel.

Physical Layout

Figure 6. 4603 PCB Layout

Three sets of input terminals occupy the bottom of the circuit card. Immedi-

ately above a group of 12 DIL switches provide a means for setting the radio

site code. Above again and to the right a set of six DIL switches control the

general operation of the transmitter. The left side of the circuit card holds a

soldered-in Lithium battery, and the BNC aerial connector.

The 4603-6x series provide three sets of input connectors: A, B, and I/P Con.

Each set of three connectors comprises positive (+Ve), input, and Ground

(Gnd).

The lower left corner of the circuit card holds the lid Tamper switch. The

switch is connected to screw terminals to left of the main inputs which are

isolated from any other circuits on the card. You can connect this output to

your own equipment. The switch contact opens when the lid opens, and

closes when the lid closes.

If you wish to use a keyswitch, Scantronic recommend the Lowe & Fletcher

mini keyswitch, part number 5021052. You can obtain the switch from Lowe

& Fletcher Ltd. (01179 721381).

4603

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

Brak uwag

Scantronic 4603 Instrukcja Instalacji Strona 10