Scantronic 8136 Podręcznik Użytkownika Pobierz pdf (Strona 23)

496339 Issue 1 23 of 44

Areas. Each Area is a set of detectors in the same physical area. The 8136

can use up to eight Areas. You assign detectors to an area during program-

ming.

Levels. A Level is a group of Areas that can be set or unset at the same

time. Each Level can be thought of as a different level of security. The 8136

provides up to four Levels, labelled A, B, C and D. Each Level can have its

own Exit Mode, Entry and Exit Times, Alarm Response, and Re-Arm Re-

sponse. LEDs on the keypads show the status of each Level.

Flexi-Zone

. A Flexi zone is a zone type that can be used whenever you

want a zone to change type according to the Level of setting in use. Since an

Area can belong to more than one Level, and each Level can have different

entry/exit routes, then a zone with type Final Exit at one Level may need to be

a Normal Alarm at another Level. You can program a Flexi-Zone to be one of

the types Normal Alarm, Final Exit, Not Used or Entry Route for any Level in

which it appears.

Partition. A Partition is a collection of one or more Areas operating together

as an independent alarm system. The 8136 can use up to four Partitions.

Each Area can belong to only one Partition, and a Partition must have at least

one Area. You cannot program a Level to set Areas from more than one

Partition, however a user can be assigned to more than one Partition. Parti-

tions can be used to restrict access to parts of the system.

Factory Defaults

When delivered from the factory, the 8136i is preprogrammed with the

following default settings:

System Users

UO1: Name = User 01, Access Code 1234, Authority Level

A,B,C,D, System Full Use, Zone omit Permitted, Log

Access = Permitted, Change Area and Zone names =

Permitted, Change Data and Time = Permitted, Reset =

Permitted

User 02-95: Not Used (Duress=Disabled)

User 00: Name - Installer, Access Code = 7890

Installer programming

Menu 10: Account Name = No Name

Menu 20: Zone expansion = Default to whichever expander card is

fitted

Menu 30: Program zones

Menu 31: Zone Names = ZO1: Zone 001 (all other zones to Zone

[nnn])

8136 Factory Defaults

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

Brak uwag

Scantronic 8136 Podręcznik Użytkownika Strona 23